High Suction Cartridge Filter Sanding Dust Collector Workbench

High air suction cartridge filter sanding dust extractor workbenchFeel free to contact Rice Ding, TEL: 86-15953214653Operating Principle:Under the device\'s high negative pressure, the fume and dust through suction pipe into the purifier, with the Martian dust before enter the purifying cavity were blocked and separated by fire

Featured Products

High air suction cartridge filter sanding dust extractor workbench

Feel free to contact Rice Ding, TEL: 86-15953214653

Operating Principle:
Under the device's high negative pressure, the fume and dust through suction pipe into the purifier, with the Martian dust before enter the purifying cavity were blocked and separated by fire sand . the remaining dust flow is blocked and uniform distribution by flow plate inside the purifying cavity, in order to better purified by cartridge filter.
Larger particles of dust under the action of gravity sinking into the collection of ash hopper, while small particles of dust under the action of suction generated by the eddy current is suspended in internal to purify by cartridge filter.
Small particles of dust on the surface of the filter cartridge, after the effect of gathered adsorption and combined, sinking into the ash hopper. After purification, the air flow out, offer a healthy working environment for workers.

Siemens motor

Three-phase 380V voltage in the power system uses Siemens three-phase asynchronous motor, equipped with special custom aluminum alloy impeller, designed with perfect combination of negative pressure and flow, stable operation, low failure rate, low noise and continuous operation for 24 hours.

Filter cartridge filter

The filter system uses a filter cartridge filter, Japan Toray polyester fiber substrate. Standard configuration PTFE coating material, the filtration efficiency of dust with an equivalent diameter of 0.3 micron or more is over 99%, and the filter material of higher filtration precision can be selected..

Electronic control system

In terms of electrical systems, the main electronic control components use the internationally renowned brand.The motor realizes independent control of the electric box, built-in power main switch, thermal overload protection, phase loss, phase reversal and other phase sequence protection. The control panel is simple and generous, and can easily realize remote control and linkage control.

Drawer dust box

The dust box adopts a drawer structure. When the dust is full, the door panel is opened, and the dust box can be pulled out to clean the dust. After the dust box is sent, the dust box can be fed. Convenient, fast and practical.

Products Advantage:
1)Unique desktop design is very perfect, baffles are removable, built-in dust removal system, no need pipe connection, reduced energy costs
2) Compact structure, it occupies a limited area. 
3) The exhaust inlets set the guide plate, to prevent the dust hit the filter directly, so as to prolong the service life of filter core.
4)adopts high efficient centrifugal fan, with high efficiency, stable operation function. At the same time, use the noise reduction processing for the fun to reduce noise.
5)workbench and dust removal function integration design, directly to remove the dust from the source
6) Pulsing back-flushing automatic dust-removal system, can guarantee the equipment in good working condition.
7) Draw-out type dust box, convenient cleaning 


*Application Place:
 
Variety of welding, polishing, deburring, polishing and plasma cutting, etc. and etc.
 **Technical Parameter: 

High Air Suction Cartridge Filter Sanding Dust Extractor Workbench

ModelLB-DK5000LB-DK6500
Treatment of air flow5000 m3/h6500 m3/h
Motor Power2*2.2kW2*4.0kW
Voltage380 V/50 Hz380 V/50 Hz
 Cleaning Methodsautomatic Cleaningautomatic Cleaning
Compressed Air0.5~0.6 MPa0.5~0.6 MPa
Filtration efficiency>99.9%>99.9%
Number of cartridge filters4 pieces4 pieces
Specification of filter cartridge(mm) Φ325*770mm Φ325*920mm
Filter mediumPTFE Nanometer fiber elementPTFE Nanometer fiber element
Filtration efficiency>99.9%>99.9%
Noise≤75±5dB(A)≤75±5dB(A)
Dimensions2200(L)×1050(W)×1550(H)mm2200(L)×1200(W)×1550(H)mm

High Air Suction Cartridge Filter Sanding Dust Extractor Workbench

ModelLB-DG3000
Treatment of air flow3000 m3/h
Motor Power3.0kW
Voltage380 V/50 Hz
 Cleaning Methodsautomatic Cleaning
Compressed Air0.5~0.6 MPa
Filtration efficiency>99.9%
Number of cartridge filters2 pieces
Specification of filter cartridge(mm) Φ325*465mm
Filter mediumPTFE Nanometer fiber element
Filtration efficiency>99.9%
Noise≤75±5dB(A)
Dimensions1200(L)×800(W)×1470(H)mm

Service
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. OEM&ODM are welcomed.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional
engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory : We are manufacturer, specializing in producing all kinds of machinery for
more than 20 years, competitive with good quantity.
7.Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment
charges is usually paid by your side, the charges will be rebounded when we have formal order.



Qingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: No 1,Loobo road,Jinling industry Park,Chengyang,  Qingdao, China

Phone/ :+86 15953214653
Tel: +86-532-8068 6722
Fax    : +86-532-8068 7597
    
  

 
 


 

 
 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours