DLM Series-PP Pleated Filter Cartridge
General Description
The DLM Series PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1-50μm. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process applications. These cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. DLM Series filter cartridges are available in a wide range of configurations to fit most commercially available filter housings.
Applications
--Pharmaceutics
--Food and beverage
--Oil& Gas
--Microelectronics
--Chemical industry
--Pre-filtration for RO
--Paints& Coatings
--Cosmetics
--Photographic solutions
--Plating solutions
Features
--Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases
--Pleated design increased the filtration area
--Low pressure drop, long service life
--Full range of removal rating
--Graded pore density for high dirt holding capacity
--FDA compliance material
Specifications
Dimensions
Material of Constructions
Performance
Part Numbers/Ordering Information
DLM Series-PP Pleated Filter Cartridge P/N: DLMPP-*-+-X(e.g., DLMPP-0.22-10-F-S-S)
General Description
The DLM Series PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1-50μm. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process applications. These cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. DLM Series filter cartridges are available in a wide range of configurations to fit most commercially available filter housings.
Applications
--Pharmaceutics
--Food and beverage
--Oil& Gas
--Microelectronics
--Chemical industry
--Pre-filtration for RO
--Paints& Coatings
--Cosmetics
--Photographic solutions
--Plating solutions
Features
--Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases
--Pleated design increased the filtration area
--Low pressure drop, long service life
--Full range of removal rating
--Graded pore density for high dirt holding capacity
--FDA compliance material
Specifications
Dimensions
| Outside diameter | 2.7"(69mm) |
| Length | 9.75", 10", 20", 30", 40" |
| Filter media | PP |
| Support/Drainage | PP |
| Cage/Core/End cap | PP |
| Seal material | Silicone, EPDM, NBR, Viton, Teflon, E-FKM |
| Removal rating | 0.1μm, 0.22μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm, 50μm |
| Maximum operating temperature | 80ºC at 1 bar, support adaptors are recommended for temperature exceeds 50ºC |
| Maximum operating differential pressure | 4.0 bar at normal temperature |
| Maximum operating differential pressure(reverse direction) | 2.0 bar at normal temperature |
| Sterilization temperature time | 5 times, 20 minutes cycles at 120ºC |
Part Numbers/Ordering Information
DLM Series-PP Pleated Filter Cartridge P/N: DLMPP-*-+-X(e.g., DLMPP-0.22-10-F-S-S)